-
What's the real difference between Dow Corning 789 and 791?
-
My supplier says the 789 is the "best on the market." Should I trust that?
-
O-ring gland calculator—why should a purchasing person care?
-
Can you stack foam board insulation?
-
Medical-grade silicone—do I need to worry about the brand for our lactation room?
-
Is rush delivery worth the premium?
I manage purchasing for a 180-person company. Last year, that meant around $420,000 spread across 14 vendors—everything from facility maintenance supplies to the stuff nobody else wanted to figure out.
My background isn't in engineering or materials science. I learned this stuff by messing up, getting burned, and asking the same questions three or four times until someone gave me a straight answer.
Here are the questions I actually get asked—usually in a panic, usually the day before something's due.
What's the real difference between Dow Corning 789 and 791?
Short answer: 789 is a low-modulus, ultra-low-odor silicone that's great for indoor applications where you don't want that vinegar smell hanging around. 791 is a medium-modulus weatherseal silicone for exterior joints.
In practice, I keep both on hand. 789 goes to anything inside the building—office partitions, bathroom fixtures, HVAC surrounds. 791 goes outside—window perimeters, curtain wall joints, anything exposed to weather.
The mistake I made early on: buying 791 for interior work because it was cheaper in bulk. We ended up with complaints about the odor for two days. Not catastrophic. But annoying enough that I stopped.
"This worked for us, but our usage is pretty predictable. If you're doing a one-off small repair, a caulk tube from the local hardware store might be fine. You don't always need a premium product."
One more thing—Dow Corning as a brand name is a bit complicated now. The company restructured years ago. If your supplier is still selling "Dow Corning" sealants, verify the stock is legit. We got burned once by a reseller pushing old inventory with faded labels. Not fun.
My supplier says the 789 is the "best on the market." Should I trust that?
Look, 789 is a good product. It's reliable. But "best on the market" is marketing talk. The right sealant depends on what you're sealing.
I'll be honest—I've used generic silicone that performed just fine for basic indoor use. The difference shows up in extreme conditions: high movement joints, harsh weather, or applications where a failure means water damage.
Here's my rule: for critical applications, I buy the name brand. For basic stuff, I'll try a lower-cost alternative and monitor it. But I always, always test a new product on a small area first. I learned that lesson after a "great deal" on bulk sealant turned out to have a shelf life of about three months.
O-ring gland calculator—why should a purchasing person care?
Honestly? Most purchasing people don't care. But they should.
An O-ring gland calculator tells you whether the dimensions of an O-ring groove will create a proper seal. If the gland is too big, the O-ring won't seat. Too small, and it'll pinch or tear.
The reason I know this: we had a maintenance issue where someone ordered replacement O-rings for a piece of equipment and they kept failing. Turned out the gland dimensions on the equipment didn't match the manufacturer's specs—the equipment had been modified years ago and nobody updated the documentation.
What I do now: whenever someone hands me a spec for O-rings, I ask if they've verified the gland dimensions. If they haven't, I don't place the order.
Can you stack foam board insulation?
The fact that you're asking this means you're probably in the middle of a retrofit or a small renovation project that didn't get enough budget for proper insulation.
Yes, you can stack foam board. But here's the catch: every layer adds cost and complexity, and the R-value doesn't add up perfectly. You also need to think about moisture barriers, condensation, and whether your fasteners are long enough to go through multiple layers.
My advice: get a quote for the right thickness first. Sometimes stacking doesn't save you much, and you might end up paying more in labor.
I'll admit I'm not the expert here. Our facilities manager handles the technical specs. I just make sure the invoice matches the purchase order.
Medical-grade silicone—do I need to worry about the brand for our lactation room?
For breast pump accessories and silicone breast pads, yes, the source matters.
We set up a lactation room for employees a couple of years ago. I sourced the furniture and supplies. The pump parts were specified by the health department's guidelines, but I had to choose the supplier.
Here's what I learned: "medical grade" isn't a single standard. It usually means the silicone meets certain biocompatibility requirements (like USP Class VI). But not every manufacturer tests the same way.
What I did: asked the vendor for documentation. Actual test certificates, not just a marketing claim. Most reputable suppliers will provide this. The ones who can't? That's a red flag.
"I can only speak to what we needed—basic lactation room supplies. If you're sourcing silicone components for a medical device or a clinical application, there are probably requirements I'm not aware of."
Is rush delivery worth the premium?
In March 2024, we paid $380 extra to get a batch of sealant delivered in two business days. The alternative was missing a client walkthrough on a renovation project that was already delayed.
The client walkthrough was worth more than $15,000 in potential contract renewals. The sealant was the last piece we needed to finish the front lobby.
That time, yes. Rush fee worth it.
Other times? Not so much. I once paid a 40% premium on a shipment of O-rings that ended up sitting in the warehouse for three weeks because the maintenance project got delayed by the equipment supplier.
Here's my rule: I'll pay for guaranteed delivery when there's a hard deadline with real consequences. I won't pay for it just because someone in another department said "as soon as possible."
The most frustrating thing: vendors who say "probably will arrive by Friday" and then it shows up Wednesday, or Monday, and you're stuck making decisions based on their vague guesses. I'd rather pay for a guaranteed date than gamble on a maybe.
I still kick myself for the time I went with the cheaper quote on a critical order and it showed up two days late. The project manager had to reschedule a client meeting. I've never lived it down.